EXPI-D blocks are similar to CobraNet Input blocks, except they are designed for use with AudiaEXPI-D hardware specifically and, therefore, automatically allow for Internal Propagation Delay. CobraNet® Input blocks may be used with AudiaEXPI-D hardware, but Internal Propagation Delay must be manually set (1.67mS).
Adjust external signal source so that Peak In flashes only occasionally (6dB headroom). Mute In turns the input signal on/off. Level In adjusts the relative input volume. Invert In reverses the polarity of the input signal.
CobraNet Bundle assigns digital audio data to a particular bundle number. CobraNet Bundle Numbers are used to match those of the actual AudiaEXPI hardware being used in the system. Normally, 'unicast' bundles 256 ~ 61,439 are selectable. These are device specific bundles (for exchange of digital audio with only one other device). Multicast allows selection of bundles 1 ~ 255, which are not device specific (for exchange of digital audio with multiple devices). Enable turns on/off the exchange of CobraNet digital audio data from this device.
Right-clicking over certain settings will provide a menu of additional options.