EXPI-4 blocks are similar to CobraNet Input blocks, except they are designed for use with AudiaEXPI-4 hardware specifically and, therefore, automatically allow for Internal Propagation Delay. CobraNet Input blocks may be used with AudiaEXPI-4 hardware, but Internal Propagation Delay must be manually set (1.00mS).
Adjust AudiaEXPI-4 input trim (gain) controls so that Peak In flashes only occasionally (6dB headroom).
Mute In turns the input signal on/off.
Level In adjusts the relative input volume.
Invert In reverses the polarity of the input signal.
CobraNet Bundle assigns digital audio data to a particular bundle number. CobraNet® Bundle Numbers are used to match those of the actual AudiaEXPI-4 hardware being used in the system. Normally, 'unicast' bundles 256 ~ 61,439 are selectable. These are device specific bundles (for exchange of digital audio with only one other device).
Multicast allows selection of bundles 1 ~ 255, which are not device specific (for exchange of digital audio with multiple devices).
Enable turns on/off the exchange of CobraNet digital audio data from this device.
Right-clicking over certain settings will provide a menu of additional options.