|
HPF |
Attribute |
Commands |
Index |
Value Range |
|
Cut-Off Freq. |
HPFLTFC |
SET, SETL, GET, GETL, SETD, GETD |
None |
20 ~ 20000 * |
|
Filter Bypass |
HPFLTBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
* Can contain a decimal number.
|
LPF |
Attribute |
Commands |
Index |
Value Range |
|
Cut-Off Freq. |
LPFLTFC |
SET, SETL, GET, GETL, SETD, GETD |
None |
20 ~ 20000 * |
|
Filter Bypass |
LPFLTBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
* Can contain a decimal number.
|
High Shelf Filter |
Attribute |
Commands |
Index |
Value Range |
|
Cut-Off Freq. |
HSFLTFC |
SET, SETL, GET, GETL, SETD, GETD |
None |
20 ~ 20000 * |
|
Gain |
HSFLTGAIN |
SET, SETL, GET, GETL, INC, DEC, SETD, GETD |
None |
-27 ~ 9 * |
|
Filter Bypass |
HSFLTBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
* Can contain a decimal number.
|
Low Shelf Filter |
Attribute |
Commands |
Index |
Value Range |
|
Cut-Off Freq. |
LSFLTFC |
SET, SETL, GET, GETL, SETD, GETD |
None |
20 ~ 20000 * |
|
Gain |
LSFLTGAIN |
SET, SETL, GET, GETL, INC, DEC, SETD, GETD |
None |
-27 ~ 9 * |
|
Filter Bypass |
LSFLTBYP |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
* Can contain a decimal number.
Example: Set Device 1 High Shelf Filter Gain at Instance 100 to -10dB.
|
Command |
Device_# |
Attribute |
Instance_ID |
Index_1 |
Index_2 |
Value |
Line_Feed |
|
SET |
1 |
HSFLTGAIN |
100 |
None |
None |
-10 |
<LF> |
Result: SET 1 HSFLTGAIN 100 10 <LF>
|
All-Pass Filter |
Attribute |
Commands |
Index |
Value Range |
|
Bandwidth |
APFLTBWBND |
SET, SETL, GET, GETL, SETD, GETD |
1 |
0.01 ~ 4.0 * |
|
Center Freq. |
APFLTFCBND |
SET, SETL, GET, GETL, SETD, GETD |
1 |
20 ~ 20000 * |
|
Filter Bypass |
APFLTBYPBND |
SET, GET, SETD, GETD |
1 |
0 = active 1 = bypassed |
|
Bypass All |
APFLTBYPALL |
SET, GET, SETD, GETD |
None |
0 = active 1 = bypassed |
* Can contain a decimal number.
Note: Index1 represents the filter band to be controlled. All-Pass Filter bands are initially numbered from left to right, and the selected band is displayed in the upper left hand corner of the All-Pass Filter dialog screen in Audia software. Use this number as Index1 for All-Pass Filter strings.